{"id":1757959127111,"title":"PC TEMPER2 Sensor USB Temperature Data Logger","handle":"pc-temper2-sensor-usb-temperature-data-logger","description":"\u003cp\u003eEMPer2 USB Dual Temperature Sensor\u003c\/p\u003e\n\u003cp\u003eTEMPer USB Sensors are great little devices for getting data logging quickly and easily! They're compatible with most \"standard\" PC \u0026amp; Laptop operating systems including Windows and Mac, but we love them because they're super easy to set up on the Raspberry Pi!\u003c\/p\u003e\n\u003cp\u003eThis is the TEMPer2 Dual Thermometer, which features two temperature sensors. One is inside the USB module, and the other is extended outside by the included water resistant node cable. The two sensors can measure temperature at a same time, and they're designed to record the temperature of the USB device and its environment simultaneously and accurately. The TEMPer2 includes 1m Length Temperature Node Cable (3.5mm Jack)\u003c\/p\u003e\n\u003cp\u003ePlug it directly into your Pi's USB port and follow our simple set up guide here to start recording data! To use on a Windows PC, simply plug the sensor in, open up a text document, hold CAPS LOCK and it will start recording data. To stop recording data, hold NUM LOCK!\u003c\/p\u003e\n\u003cp\u003ePlease Note. The on board thermometer of this device WILL be (and is designed to be) affected by the temperatures of the driving system if connected directly to that system's USB port. We highly recommend the use of a USB Extension cable to obtain more accurate results if you are trying to monitor the environmental temperature.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003cbr\u003e\u003c\/strong\u003eTemperature Range: -40 to 125°C\/ -40 to 257F \u003cbr\u003eTemperature Sensor: LM75 \u003cbr\u003eResolution rate: 0.06°C \u003cbr\u003ePrecision: ± 2°C \u003cbr\u003eCurrent Draw:\u0026lt; 10mA \u003cbr\u003eVoltage: 5V \u003cbr\u003eSystem: Windows NT, XP, VISTA, SO \u003cbr\u003eMemory Requirements: 20M \u003cbr\u003eUSB Thermometer Size: 44.00mm x 18.75mm x 11.40mm \u003cbr\u003eCAPS LOCK - On \/ NUM LOCK - Off \u003cbr\u003eOn board \"TXT\" button enables \"No Software\" Data Output \u003cbr\u003eIncludes 1m Length Temperature Node Cable (3.5mm Jack)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging included:\u003cbr\u003e\u003c\/strong\u003e1 x TEMPer2 USB Thermometer \u003cbr\u003e1 x Cable \u003cbr\u003e1 x Software CD\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDownloads\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.modmypi.com\/blog\/how-to-use-the-temper-usb-sensors\"\u003eSimple Set Up Guide\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"http:\/\/pcsensor.com\/usb-thermometer\/temper2.html\"\u003ePCSensor Website\u003c\/a\u003e\u003c\/p\u003e","published_at":"2019-06-24T14:40:41+05:30","created_at":"2019-05-30T07:55:21+05:30","vendor":"TEMPer2","type":"Temperature Measurement","tags":["Data Logger","Recorder","Temperature","Thermometer"],"price":295000,"price_min":295000,"price_max":295000,"available":true,"price_varies":false,"compare_at_price":369500,"compare_at_price_min":369500,"compare_at_price_max":369500,"compare_at_price_varies":false,"variants":[{"id":17242367000647,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"PC TEMPER2 Sensor USB Temperature Data Logger","public_title":null,"options":["Default Title"],"price":295000,"weight":0,"compare_at_price":369500,"inventory_management":null,"barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0065\/1486\/8295\/products\/PC_TEMPER2_data_logger.jpg?v=1561367507"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0065\/1486\/8295\/products\/PC_TEMPER2_data_logger.jpg?v=1561367507","options":["Title"],"content":"\u003cp\u003eEMPer2 USB Dual Temperature Sensor\u003c\/p\u003e\n\u003cp\u003eTEMPer USB Sensors are great little devices for getting data logging quickly and easily! They're compatible with most \"standard\" PC \u0026amp; Laptop operating systems including Windows and Mac, but we love them because they're super easy to set up on the Raspberry Pi!\u003c\/p\u003e\n\u003cp\u003eThis is the TEMPer2 Dual Thermometer, which features two temperature sensors. One is inside the USB module, and the other is extended outside by the included water resistant node cable. The two sensors can measure temperature at a same time, and they're designed to record the temperature of the USB device and its environment simultaneously and accurately. The TEMPer2 includes 1m Length Temperature Node Cable (3.5mm Jack)\u003c\/p\u003e\n\u003cp\u003ePlug it directly into your Pi's USB port and follow our simple set up guide here to start recording data! To use on a Windows PC, simply plug the sensor in, open up a text document, hold CAPS LOCK and it will start recording data. To stop recording data, hold NUM LOCK!\u003c\/p\u003e\n\u003cp\u003ePlease Note. The on board thermometer of this device WILL be (and is designed to be) affected by the temperatures of the driving system if connected directly to that system's USB port. We highly recommend the use of a USB Extension cable to obtain more accurate results if you are trying to monitor the environmental temperature.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003cbr\u003e\u003c\/strong\u003eTemperature Range: -40 to 125°C\/ -40 to 257F \u003cbr\u003eTemperature Sensor: LM75 \u003cbr\u003eResolution rate: 0.06°C \u003cbr\u003ePrecision: ± 2°C \u003cbr\u003eCurrent Draw:\u0026lt; 10mA \u003cbr\u003eVoltage: 5V \u003cbr\u003eSystem: Windows NT, XP, VISTA, SO \u003cbr\u003eMemory Requirements: 20M \u003cbr\u003eUSB Thermometer Size: 44.00mm x 18.75mm x 11.40mm \u003cbr\u003eCAPS LOCK - On \/ NUM LOCK - Off \u003cbr\u003eOn board \"TXT\" button enables \"No Software\" Data Output \u003cbr\u003eIncludes 1m Length Temperature Node Cable (3.5mm Jack)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging included:\u003cbr\u003e\u003c\/strong\u003e1 x TEMPer2 USB Thermometer \u003cbr\u003e1 x Cable \u003cbr\u003e1 x Software CD\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDownloads\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.modmypi.com\/blog\/how-to-use-the-temper-usb-sensors\"\u003eSimple Set Up Guide\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"http:\/\/pcsensor.com\/usb-thermometer\/temper2.html\"\u003ePCSensor Website\u003c\/a\u003e\u003c\/p\u003e"}

PC TEMPER2 Sensor USB Temperature Data Logger

Product Description
Rs 2,950.00 Rs 3,695.00
Maximum quantity available reached.

EMPer2 USB Dual Temperature Sensor

TEMPer USB Sensors are great little devices for getting data logging quickly and easily! They're compatible with most "standard" PC & Laptop operating systems including Windows and Mac, but we love them because they're super easy to set up on the Raspberry Pi!

This is the TEMPer2 Dual Thermometer, which features two temperature sensors. One is inside the USB module, and the other is extended outside by the included water resistant node cable. The two sensors can measure temperature at a same time, and they're designed to record the temperature of the USB device and its environment simultaneously and accurately. The TEMPer2 includes 1m Length Temperature Node Cable (3.5mm Jack)

Plug it directly into your Pi's USB port and follow our simple set up guide here to start recording data! To use on a Windows PC, simply plug the sensor in, open up a text document, hold CAPS LOCK and it will start recording data. To stop recording data, hold NUM LOCK!

Please Note. The on board thermometer of this device WILL be (and is designed to be) affected by the temperatures of the driving system if connected directly to that system's USB port. We highly recommend the use of a USB Extension cable to obtain more accurate results if you are trying to monitor the environmental temperature.

Features:
Temperature Range: -40 to 125°C/ -40 to 257F
Temperature Sensor: LM75
Resolution rate: 0.06°C
Precision: ± 2°C
Current Draw:< 10mA
Voltage: 5V
System: Windows NT, XP, VISTA, SO
Memory Requirements: 20M
USB Thermometer Size: 44.00mm x 18.75mm x 11.40mm
CAPS LOCK - On / NUM LOCK - Off
On board "TXT" button enables "No Software" Data Output
Includes 1m Length Temperature Node Cable (3.5mm Jack)

Packaging included:
1 x TEMPer2 USB Thermometer
1 x Cable
1 x Software CD

Downloads

Simple Set Up Guide
PCSensor Website

Product Code:
Brand: TEMPer2

People who bought this product, also bought