{"id":1757954932807,"title":"Rain, Raindrops Detect Sensor Module For Arduino","handle":"rain-raindrops-detect-sensor-module-for-arduino","description":"\u003cp\u003eThe item is for Arduino robot kit, raindrops, rain sensor, monitoring can be used for a variety of weather conditions, and converted into the number of the reference signal and the AO output. \u003cbr\u003eThe sensor uses the FR-04 high-quality double-sided materials, King Size 5.0 * 4.0CM, and with the surface of the nickel plating treatment, against oxidative, conductivity, superior performance and longevity; \u003cbr\u003eThe output in the form: digital switching outputs (0 and 1) and analog AO voltage output; \u003cbr\u003eTTL-level output, TTL output valid signal is low. Driving capability 100MA so, can directly drive relays, buzzer, a small fan, and so on. \u003cbr\u003eSensitivity can be adjusted via potentiometer \u003cbr\u003eLED lights up when there is no rain output is high, raindrop up, the output ground level, LED light.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDistribution bit to adjust sensitivity \u003cbr\u003eA fixed bolt hole for easy installation \u003cbr\u003ePower indicator, the output signal LED indicator \u003cbr\u003eThe comparator output, the signal is clean, waveform, driving ability over 15mA \u003cbr\u003eWide voltage LM393 comparator \u003cbr\u003eA large area of ​​rain board, more conducive to detect rain \u003cbr\u003eBoard with positioning holes to facilitate installation \u003cbr\u003eRaindrops and control panels are separate, easy to wire leads\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSmall board PCB size: 3.2cm x 1.4cm \u003cbr\u003eOperating voltage: 3.3V-5V \u003cbr\u003eVoltage: 5V\u003c\/p\u003e\n\u003cp\u003eHow to use:\u003c\/p\u003e\n\u003cp\u003eConnected to 5V power supply, the power indicator light, sensor board is not water droplets, DO output is high, the switch lights off, dropping on a drop of water, DO output is low, the indicator light switch, \u003cbr\u003eBrush off the the above water droplets, has returned to output high state. . . . \u003cbr\u003eAO analog output can be connected to the microcontroller AD port to detect the size of the drops in the above rainfall. \u003cbr\u003eDO TTL digital outputs can also be connected to the micro-controller detects whether there is rain.\u003c\/p\u003e\n\u003cp\u003eConnection mode:\u003c\/p\u003e\n\u003cp\u003e1, VCC: positive power supply (3-5V) \u003cbr\u003e2, GND: negative one. \u003cbr\u003e3, DO: TTL switching signal output \u003cbr\u003e4, AO: Analog signal output\u003c\/p\u003e\n\u003cp\u003ePackage included:\u003c\/p\u003e\n\u003cp\u003e1 x Rain sensing board \u003cbr\u003e1 x Control board \u003cbr\u003e5 x 20cm Dupont Line\u003c\/p\u003e","published_at":"2019-07-03T20:10:58+05:30","created_at":"2019-05-30T07:54:09+05:30","vendor":"Techshop Lanka","type":"Electronic component","tags":["Arduino"],"price":42000,"price_min":42000,"price_max":42000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17242354450503,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rain, Raindrops Detect Sensor Module For Arduino","public_title":null,"options":["Default Title"],"price":42000,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0065\/1486\/8295\/products\/Rain-Weather-Detect-Sensor-Module-For-Arduino.jpg?v=1562164845"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0065\/1486\/8295\/products\/Rain-Weather-Detect-Sensor-Module-For-Arduino.jpg?v=1562164845","options":["Title"],"content":"\u003cp\u003eThe item is for Arduino robot kit, raindrops, rain sensor, monitoring can be used for a variety of weather conditions, and converted into the number of the reference signal and the AO output. \u003cbr\u003eThe sensor uses the FR-04 high-quality double-sided materials, King Size 5.0 * 4.0CM, and with the surface of the nickel plating treatment, against oxidative, conductivity, superior performance and longevity; \u003cbr\u003eThe output in the form: digital switching outputs (0 and 1) and analog AO voltage output; \u003cbr\u003eTTL-level output, TTL output valid signal is low. Driving capability 100MA so, can directly drive relays, buzzer, a small fan, and so on. \u003cbr\u003eSensitivity can be adjusted via potentiometer \u003cbr\u003eLED lights up when there is no rain output is high, raindrop up, the output ground level, LED light.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDistribution bit to adjust sensitivity \u003cbr\u003eA fixed bolt hole for easy installation \u003cbr\u003ePower indicator, the output signal LED indicator \u003cbr\u003eThe comparator output, the signal is clean, waveform, driving ability over 15mA \u003cbr\u003eWide voltage LM393 comparator \u003cbr\u003eA large area of ​​rain board, more conducive to detect rain \u003cbr\u003eBoard with positioning holes to facilitate installation \u003cbr\u003eRaindrops and control panels are separate, easy to wire leads\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSmall board PCB size: 3.2cm x 1.4cm \u003cbr\u003eOperating voltage: 3.3V-5V \u003cbr\u003eVoltage: 5V\u003c\/p\u003e\n\u003cp\u003eHow to use:\u003c\/p\u003e\n\u003cp\u003eConnected to 5V power supply, the power indicator light, sensor board is not water droplets, DO output is high, the switch lights off, dropping on a drop of water, DO output is low, the indicator light switch, \u003cbr\u003eBrush off the the above water droplets, has returned to output high state. . . . \u003cbr\u003eAO analog output can be connected to the microcontroller AD port to detect the size of the drops in the above rainfall. \u003cbr\u003eDO TTL digital outputs can also be connected to the micro-controller detects whether there is rain.\u003c\/p\u003e\n\u003cp\u003eConnection mode:\u003c\/p\u003e\n\u003cp\u003e1, VCC: positive power supply (3-5V) \u003cbr\u003e2, GND: negative one. \u003cbr\u003e3, DO: TTL switching signal output \u003cbr\u003e4, AO: Analog signal output\u003c\/p\u003e\n\u003cp\u003ePackage included:\u003c\/p\u003e\n\u003cp\u003e1 x Rain sensing board \u003cbr\u003e1 x Control board \u003cbr\u003e5 x 20cm Dupont Line\u003c\/p\u003e"}

Rain, Raindrops Detect Sensor Module For Arduino

Product Description
Rs 420.00
Maximum quantity available reached.

The item is for Arduino robot kit, raindrops, rain sensor, monitoring can be used for a variety of weather conditions, and converted into the number of the reference signal and the AO output.
The sensor uses the FR-04 high-quality double-sided materials, King Size 5.0 * 4.0CM, and with the surface of the nickel plating treatment, against oxidative, conductivity, superior performance and longevity;
The output in the form: digital switching outputs (0 and 1) and analog AO voltage output;
TTL-level output, TTL output valid signal is low. Driving capability 100MA so, can directly drive relays, buzzer, a small fan, and so on.
Sensitivity can be adjusted via potentiometer
LED lights up when there is no rain output is high, raindrop up, the output ground level, LED light.

Feature:

Distribution bit to adjust sensitivity
A fixed bolt hole for easy installation
Power indicator, the output signal LED indicator
The comparator output, the signal is clean, waveform, driving ability over 15mA
Wide voltage LM393 comparator
A large area of ​​rain board, more conducive to detect rain
Board with positioning holes to facilitate installation
Raindrops and control panels are separate, easy to wire leads

Specification:

Small board PCB size: 3.2cm x 1.4cm
Operating voltage: 3.3V-5V
Voltage: 5V

How to use:

Connected to 5V power supply, the power indicator light, sensor board is not water droplets, DO output is high, the switch lights off, dropping on a drop of water, DO output is low, the indicator light switch,
Brush off the the above water droplets, has returned to output high state. . . .
AO analog output can be connected to the microcontroller AD port to detect the size of the drops in the above rainfall.
DO TTL digital outputs can also be connected to the micro-controller detects whether there is rain.

Connection mode:

1, VCC: positive power supply (3-5V)
2, GND: negative one.
3, DO: TTL switching signal output
4, AO: Analog signal output

Package included:

1 x Rain sensing board
1 x Control board
5 x 20cm Dupont Line

Product Code:

People who bought this product, also bought